Beveltool
Revolutionizing the landscape of metal beveling and finishing, Beveltools presents a paradigm shift that promises swifter, more cost-effective, and precision-focused solutions. Conventional methods of weld preparation, rounding, and beveling pose physical strains, lack accuracy, and consume time. There’s room for a transformative approach… Discover the Bevel Mite® and Bevel Mate® machines and cutters – two streamlined and ergonomic concepts meticulously crafted by Beveltools. These concepts redefine the narrative, making weld preparation, beveling, and rounding metal effortless, rapid, highly precise, and economically efficient.
Application Video
Benefits
- Beveltools cutters have the great advantage over sanding discs that the removed metal falls down as chips. Sanding discs blow the metal as fine dust into the workplace, this results in a bad and unhealthy working environment. With the
- Cutting the Beveltools cutters also provides a minimal amount of vibration from the machine. Working with machines that provide a lot of vibration is bad for the health of the user (HAVS).
Because the cutters have many more cutting edges than a head with change plates, the cutters also last much longer. For example, with a radius 3mm-08-v3.0 router, you can mill over 300 meters on S355 in most cases. This results in a cost-effective price per meter for you, further bolstered by the reduced machine downtime associated with changing sanding discs or turning inserts. - The end result is demonstrably better than with sanding discs or inserts. After machining with a Beveltools cutter, finishing is almost never necessary. This also saves time and ultimately costs.
- Our cutters use very compact guide bearings which allow you to leave sheet metal as small as 10 mm on the surface while machining the edges.
- Beveltools cutters, due to their cutting action, give the advantage that no heat is added to the material to be machined. Therefore, there is no chance of deformation of the sheet metal and there is no discoloration of the machined cutting edge.
- Beveltools cutters you no longer have this issue.
Because the Beveltools cutters cut the metal, they produce much less noise than when working with sanding discs or insert machines. The latter have much less cutting action and chop the edge off more than they cut. - If you want to quickly switch between a 22.5° cutter and a 60° cutter, for example, this can be done within 35 seconds. Unlike other solutions, you do not need to make any adjustments to the machine. All you have to do is change the cutter itself. This too makes Beveltools solution unique.
- The end result is demonstrably better than with sanding discs or inserts. After machining with a Beveltools cutter, finishing is almost never necessary. This also saves time and ultimately costs.
- It is possible to machine holes as small as 16 mm in diameter.